n.溫升

All fillers lowered the maximum exotherm. 所有填料都降低放熱效應。

DSC was used to measure the exotherm during curing of the blend resin system. 3．通過DSC測試了共混樹脂的固化放熱性能，并比較了共混樹脂在兩類不同室溫固化體系下的放熱性能。

Because many roasting systems exhibit thermal hysterysis using simple temperature regulating schemes, care must be taken not to allow the coffee mass to exotherm. 因為許多烘焙系統使用簡單的溫度調節機理，這些系統會表現出熱滯后效應，所以一定要很小心，不要讓咖啡放熱。

Excessive dispersion time at high speed causes temperature build-up which can result in marked viscosity reduction, with severe splashing at least, and the possibility of a dangerous exotherm. 過多的分散時間會升高溫度，粘度降低，導致漆料濺出，可能的放熱危險。

And by compare the exotherm of the resin cured by two kind of curing system at room temperature we can found that the resin we synthesized has lower exotherm, especially when use BPO as initiator.4. 證明該樹脂體系具有較低的固化放熱峰，而且表明以過氧化苯甲酰作為引發劑具有更低的放熱峰溫度。

adj.發熱的；放出熱量的