n.動力測定法
It is shown that the two factors are the main error resources of load rejection testing using dynamometry method. 分析表明，以上因素均是導致測功法試驗結果偏高的原因。
Generally the input equipment can procure the thenar information by three kinds of methods: scanner, dynamometry board and video camera. 輸入設備獲取足底信息的方式通常有三種：掃描儀、測力板、攝像頭。
A mechanics model of dynamometry bolt was given and it was shown that dynamometry bolt mainly bear tension and torque in real application. 給出巷道支護中測力錨桿的力學模型,指出測力錨桿實際應用中主要承受拉力、扭矩作用。
Load rejection testing of turbogenerators using dynamometry method gives a calculated value of speed rise higher than the measured value in the equivalent routine testing. 目前測功法甩負荷試驗算出的飛升轉速偏高于等價條件下常規法甩負荷的測量結果。
Hydraulic dynamometry rotor was casted from brass alloy.Because of theworking requirement for driving liquid, the laminas of the rotor are assembledslantways and have a complicated structure . 水力測功器轉子是由黃銅合金鑄造而成，由于轉子工作時驅動液體的需要，葉片均呈傾斜狀，結構比較復雜。
